Welltherm application example. The chosen colour is coordinated in your quotation.
WELLTHERM · METAL PANELS
Metal infrared panel in a RAL colour
Explore the available Welltherm range, prices and ordering options. Opens in a new tab.
Select your model and discuss a tailored proposal with HeatXL
A metal infrared panel in a RAL colour brings warmth and your interior colour together. The Welltherm RAL metal range combines an individual colour with a satin-matt finish.
RAL colours: metal panels only
Custom RAL colours are available only for Welltherm metal infrared panels. Glass panels are not available in a custom RAL colour. Not all RAL colours are available. Tell us your preferred RAL code; we confirm availability for the colour and panel version before you order.
View the RAL colour chart (PDF) (Opens in a new tab)
Colour chart 2024/2025. Colours on a screen or printed page may differ from the finished panel.
We match the panel, connection and controls together. View the connection and controls or discuss your existing installation when making an enquiry.
- Individual RAL colour
- satin-matt metal front
- ESHC Plus heating technology
A tailored proposal for your space, finish and installation.
The colour of your wall or design
Do you want the heating panel to discreetly match a colour surface or remain visible as an accent? The metal RAL version allows that choice. Front material remains metal with a satin-matt surface. Provide the desired RAL number so the quotation describes the correct colour and product version.
For a coloured metal panel, we match the RAL number and satin-matt finish to your interior together. A proof approximates colour; differences between proof material and panel may produce small variations. Colour choice does not change required heating output. Alongside appearance, we therefore assess heat loss, panel size and thermostat position.
A personal colour, suitable technology
A metal infrared panel in a RAL colour combines ESHC Plus technology with your colour choice. We first determine suitable output and size, then coordinate the RAL code and finish. Your quotation records chosen colour, delivery timing and conditions for the personalised version.
Current range
Welltherm RAL Metal
A metal panel in your RAL colour. We match size, output and desired finish together.
| Article | Version | Power output | Dimensions | Weight | Quotation |
|---|---|---|---|---|---|
| FAPB0330 | RAL metal | 330 W | 59,2 × 59,2 × 1,7 cm | 7,8 kg | Choose FAPB0330 |
| FAPB0510 | RAL metal | 510 W | 59,2 × 89,2 × 1,7 cm | 11,0 kg | Choose FAPB0510 |
| FAPB0710 | RAL metal | 710 W | 59,2 × 119,2 × 1,7 cm | 14,0 kg | Choose FAPB0710 |
| FAPB0910 | RAL metal | 910 W | 59,2 × 149,2 × 1,7 cm | 17,0 kg | Choose FAPB0910 |
| FAPB1210 | RAL metal | 1210 W | 75,0 × 150,0 × 1,7 cm | 21,5 kg | Choose FAPB1210 |
- Front
- Metal
- Technology
- ESHC Plus
- Protection rating
- IP21
- Finish
- satin-matt
- Connection
- 650 mm connection cable with precon GST15i3; select suitable temperature controls separately.
Connection and application: 650 mm connection cable with precon GST15i3; select suitable temperature controls separately.
Choosing a metal infrared panel in a RAL colour
A heating panel has a visible place in the room. An individual colour lets you deliberately incorporate that position into the design. Consider an understated bedroom wall, study with a distinctive accent colour or reception space matching your business appearance. A metal infrared panel in a RAL colour is both a heat source and finished interior element. Selection starts with the space and desired appearance but ends only when output, size and controls fit too.
To blend the panel into the wall, provide the relevant surface’s RAL code and discuss the wall finish. For an accent, relate the colour to furniture, window frames or other details. A colour code makes the enquiry specific. A general description such as warm grey or green is insufficient for a final order because many shades fit those descriptions. We therefore record the chosen version before confirming the order.
We offer a broad choice of RAL colours for this metal range. Availability of your specific colour and version is included in the proposal. Ask separately about special preferences; a RAL code does not automatically mean every effect paint, texture or gloss level belongs to this range. The finish described here is satin-matt. We therefore assess beforehand whether your design preference matches the product actually available for supply.
What a RAL code and colour proof tell you
A screen image helps establish atmosphere but is not a reliable order colour reference. Screen settings, lighting and photography affect the shade you see. The application photo at the top shows how a coloured panel can fit an interior. It does not reveal an exact RAL number. Use the desired code for colour coordination and discuss the reference used in your project.
A printed proof must also be understood as an approximation of final colour. Paper and a painted metal front are different materials. Slight colour variations may therefore arise during production. This particularly matters beside a painted wall, cupboard front or another coloured surface. A matching colour code guides the design but does not promise different materials look identical under every light source.
Therefore consider the colour choice in the actual room. Daylight, evening lighting and surrounding surface colours affect perception. For several panels, discuss quantities and desired coherence together. We include colour coordination, any proof and conditions in the quotation. You then choose based on the actual version rather than only a small colour representation on a website.
Compare the 5 models by space and size
This range includes five models of metal infrared panel in a RAL colour. The table shows article number, nominal output, dimensions and weight. The smallest FAPB0330 is square, measuring 59.2 by 59.2 centimetres at 330 watts. FAPB0510, FAPB0710 and FAPB0910 share a 59.2-centimetre width with increasing lengths of 89.2, 119.2 and 149.2 centimetres. You can therefore choose a rectangular surface where it better fits the available position.
FAPB1210 measures 75 by 150 centimetres and has an output of 1210 watts. It is larger and heavier than the other models in this table. All five have a specified thickness of 1.7 centimetres. Use these article details for product selection but also reserve required installation space under the manual. Panel overall dimensions alone do not identify all clear space around the complete mounting.
Higher wattage is not an independent argument for always choosing the largest model. Required output relates to heat loss and usage. Sometimes one panel at a good position fits; sometimes layout requires several heat sources. Provide not just area but also height, windows, insulation and desired temperature. Table model buttons include a specific item in the enquiry; we then develop colour selection together.
Let heat demand determine the technical choice
A RAL colour does not change the panel into another heating method. Our metal range uses ESHC Plus heating technology and emits radiant warmth. For pleasant use, we consider where people spend time and the space to heat. A panel disappearing behind large furniture may deliver warmth less effectively to the intended zone. Desired colour and correct positioning must therefore be chosen together.
A well-insulated study with limited glazing differs from a space with large windows and substantial heat loss. Usage also matters: prolonged daily heating creates different requirements from occasional supplementary heating during brief occupancy. We therefore assess whether panels supplement an existing installation or form part of a complete heating solution. For primary heating, proper assessment of total heat loss is especially important.
A general area indication does not replace that assessment. A fixed wattage per square metre also does not fit every building. To prepare an enquiry, read our explanation of calculating infrared heating and record known building conditions. We combine those details with available models. You receive a proposal matching appearance and heat demand with key starting points clearly identified.
Wall or ceiling: choose the right mounting position too
A metal infrared panel in a RAL colour from this range suits wall and ceiling mounting under associated instructions. Wall mounting lets you deliberately relate colour to the interior. Ceiling mounting leaves walls free for furniture and other elements. Always check substrate, fixings, clearances and accessible connection. A suitable product range alone is insufficient to approve every position without assessment.
Table weights range from 7.8 to 21.5 kilograms. Substrate and fixings must suit the selected panel and mounting method. For a lowered ceiling or unusual wall structure, discuss beforehand how weight is supported. Avoid colour selection overshadowing technical preparation: a carefully matched colour surface has little value when fixings or cable routes are considered only during mounting.
This range’s protection rating is IP21. That does not give general permission for every wet room or bathroom zone. For a bathroom, assess environment and installation conditions separately; other ranges may suit better. Compare your item’s instructions with on-site conditions and have electrical installation assessed by a qualified installer where needed. Our downloads page provides preparation documentation.
A metal infrared panel in a RAL colour with controls
The panel and temperature controls together form the heating solution. These models are described with a 650-millimetre white cable and precon GST15i3 connector system. This helps organise connections with compatible components. Front colour does not mean the cable automatically shares that colour. Therefore also consider cable routing and connection position for a visibly mounted version.
A suitable controller must be selected separately. Selection assesses electrical load, connection method and application functions. The catalogue associates this range with a controller for applicable ecodesign requirements. A physically fitting plug alone is insufficient; panel, any receiver and thermostat must suit each other as a combination. We help choose them together, including where controls already exist in the room.
Position the sensor to measure room temperature effectively under the selected controls’ instructions. A measurement point directly affected by sunlight or another heat source may give a distorted picture. Suitable usage times and desired temperature match heating to occupancy. View our explanation of precon, connections and controls to discuss possibilities. Wi-Fi or remote operation depends on chosen controls and is not a standard built-in feature of every RAL panel.
Output, operating time and electricity consumption
Product-card output indicates electrical energy use per unit of time during continuous heating. A 710-watt model uses 1.42 kilowatt-hours during two hours actually switched on. This is a fixed-duration calculation example, not a prediction of your room’s daily consumption. When the thermostat switches the panel off intermittently, actual heating time is shorter than programme-active time.
Calculate costs by multiplying kilowatt-hours by your electricity tariff. The result strongly relates to insulation, outdoor temperature, desired temperature and usage. We therefore promise no fixed savings percentage merely from choosing a metal infrared panel in a RAL colour. Targeted heating may suit a space used at particular times, but comparison with an existing installation must use the same comfort demand and actual conditions.
To combine colour and comfort with a considered energy choice, define when the room is used and the temperature needed beforehand. Also discuss whether existing heating contributes. This avoids a proposal where the panel looks suitable but controls do not match your routine. Our information on Welltherm infrared heating consumption helps distinguish output, actual operating time and costs.
An individual colour or another metal version?
A personalised RAL colour is especially interesting when a panel must match a specific design choice. If understated white is sufficient, compare white metal infrared panels. That range has its own assortment of sizes and outputs. Model quantities and article codes are therefore not automatically identical to this RAL range. Choose based on appearance combined with technical possibilities.
For a fixed sand-coloured or graphite appearance, also view the Sand and Graphit versions. For an image instead of a solid colour surface, a metal panel with a personalised photo offers another design approach. An image requires a suitable file; a RAL version centres on the agreed colour code and finish. We help compare these possibilities by their own characteristics.
The Welltherm infrared panels overview brings families together. Use that comparison to determine the version first, then return to model details. This avoids choosing only by a lifestyle photo. Article number, size, output and matching controls remain the specific basis of the final order.
Prepare your colour-focused quotation
A focused proposal needs the desired RAL code, panel quantity and room details. Add a floor plan or photo where possible and specify the intended panel position. Also note wall or ceiling mounting preference. If a model is already in mind, provide its FAPB code from the table. If output is not yet established, we assess it first with the other starting points.
Welltherm develops and manufactures panels in Germany. HeatXL supports product selection, coordination and service as Benelux distributor. For product or distribution questions, also contact HeatXL. A personalised version’s quotation describes agreed colour and configuration with conditions and delivery timing. We do not state a fixed delivery time for every colour here because version and availability need coordination first.
Our warranty page explains conditions and support, including the manufacturer’s warranty for applicable Welltherm infrared panels. After delivery, retain article details, purchase information and instructions with the installation. They identify the right product during a later enquiry. Once colour choice and room details are ready, use the quotation button. Your enquiry starts a complete proposal for your metal infrared panel in a RAL colour.
Documentation for your version
Match the product information and installation instructions to your chosen article number. On the downloads page, we give Dutch documents priority where available.
Questions about metal infrared panels in RAL colours
What differs from white, Sand and Graphit?
For this RAL range, we coordinate an individual RAL colour. The white PB range and Sand and Graphit versions have fixed colours and their own article ranges. Therefore compare available size and output alongside appearance. Sand and Graphit are colour names; we do not equate them with an arbitrary RAL code.
What do you need for a quotation?
Send the desired RAL code, article number and room dimensions. Also state insulation, usage times, mounting position and existing controls. A photo or floor plan helps us assess appearance and technical possibilities together.
How much does a metal infrared panel in a RAL colour cost?
Price depends on colour version, size, quantities and required controls. Visit the infraroodpaneel.nl online shop (Opens in a new tab) for the offered Welltherm range. Request a quotation for your personalised RAL version; it coordinates chosen colour and complete configuration.
Explore these options too
Metal panels
Metal infrared panels
A robust metal version with an understated white finish. The Welltherm PB range offers several sizes for homes, workplaces and suitable commercial spaces.
View finish ↗
Metal panels
Infrared heating with a personalised photo
Turn a metal Welltherm panel into a personalised image in your interior. The Bild range combines radiant warmth with an image of your choice.
View finish ↗From product choice to a tailored proposal
Tell us which space you want to heat. You receive advice on the suitable version, output and mounting with a quotation for your situation. To prepare, you can choose your panel’s colour and version.
