Welltherm product image
WELLTHERM · ACCESSORIES & FINISHES
Accessories for Welltherm infrared panels
Explore the available Welltherm range, prices and ordering options. Opens in a new tab.
Complete your Welltherm installation with a lighting frame, recessed ceiling frame or compatible bathroom accessory. Choose components that suit the panel and installation.
- LED frames for lighting
- Recessed frames for suitable ceiling mounting
- Towel rails for bathroom panels
A tailored proposal for your space, finish and installation.
An accessory for your version
With the right components, a heating panel can better suit an interior or mounting position. An LED frame combines warmth and lighting around the panel. A recessed ceiling frame helps integrate a suitable version into the ceiling. Separate towel rails are available for bathroom panels. Each component has its own dimensions and compatibility requirements.
Ceiling mounting of the current WS, SP and TA glass ranges also involves glass fixing clips. Set 14170 is for round glass heaters and set 14171 for rectangular glass heaters. These clips are a specific addition to the prescribed panel fixings. Therefore provide the article number and mounting position as well as the panel dimensions; we include the required installation components in the proposal.
Check dimensions and connections beforehand
Use your panel’s article number as the starting point. Not only width and height, but also the panel type, installation and electrical connection must match. A lighting frame, for example, may require additional controls or a transformer. We check which components fit together and include the complete combination in your quotation.
Compare the Welltherm systems
Choose the product family that suits your application. Every version has its own technical specifications and compatible components.
Accessories & finishes
Accessories & finishes
LED frames for infrared panels
Combine a Welltherm panel with warm white lighting. The LED frame adds light around a compatible glass or metal version on the wall or ceiling.
View finish ↗
Accessories & finishes
Recessed ceiling frame for infrared panels
Integrate a compatible Welltherm version into the ceiling with a dedicated recessed frame. The EB range offers four sizes for different panel dimensions.
View finish ↗
Accessories & finishes
Towel rails for bathroom panels
Complete a suitable Welltherm BKW version with a towel rail. Choose an open or continuous design and a finish that suits your bathroom.
View finish ↗Controls for radiant heaters
Documentation for your version
Match the product information and installation instructions to your chosen article number. On the downloads page, we give Dutch documents priority where available.
Questions about accessories for infrared panels
Can an accessory be added later?
That depends on the version and installation. A lighting frame needs matching dimensions, power supply and controls; a recessed frame needs a suitable ceiling structure. Provide your existing article number for a focused assessment.
What do you need for a quotation?
Send the desired item or version, together with the room dimensions and your usage. For a panel, we also assess insulation and the mounting position; for an accessory, we check the combination with the existing product.
How much does this Welltherm solution cost?
The price depends on the version, quantity, accessories and any project arrangements. Request a quotation with your product choice and situation to receive a tailored proposal.
Current range
Welltherm HP ceiling bracket
A ceiling bracket for the intended HP radiant heaters. We check the combination with your model.
| Article | Version | Power output | Dimensions | Weight | Quotation |
|---|---|---|---|---|---|
| 14214 | Uncoated stainless steel | — | 9,5 × 30,0 cm | 0,4 kg | Choose 14214 |
Connection and application: Select bracket and radiant heater separately; follow the installation manual.
Choose accessories for Welltherm infrared panels by their function
Welltherm infrared panel accessories help implement the chosen installation, finish or operation. A lighting frame has a different task from a floor stand; a bracket for an HP radiant heater is not a mounting solution for every flat panel. Therefore start with the component you want to add. Describe the panel code, desired function and location where the combination is used.
Read more
An accessory does not constitute an independent heating plan. Output and suitable panel positioning are first determined from the room. You then select components that enable that position. A fixing that looks good in the interior may still be unsuitable for the weight or specific version. We therefore check the whole configuration so the components list is more than a collection of products with similar dimensions.
Distinguish recessed mounting, lighting and freestanding installation
The EB range provides a recessed ceiling finish for compatible metal panels. The recessed frame requires a prepared support frame, actual product dimensions and sufficient free installation space. A nominal designation such as 60 by 120 centimetres does not tell you which opening to create. Consult the chosen frame’s dimensional drawing and have the ceiling structure assessed before finishing.
Read more
An LED frame adds warm white lighting to a compatible panel combination. The power supply and lighting controls are selected separately from room temperature controls for heating. A floor or universal stand instead changes the fixing method. For that, assess panel compatibility, stability, floor space and the cable route. The three groups are therefore not alternatives compared solely on appearance.
Towel accessories belong to specific bathroom panels
A towel rail is selected for the intended BP bathroom panel. The dual system has a space-heating section above and a towel-drying section below. For the described vertical installation, the upper 75 centimetres across the full width remain free of textiles. The cable is at the bottom. Use the rails and hanging method intended for the selected version.
Read more
The current catalogue lists BEE0430, BEE0550 and BEE0650 in brushed stainless steel. The open and continuous shapes offer different accessibility options. State how many towels are used and on which side an open rail must be accessible when enquiring. A standard panel does not become a towel radiator by placing a rack in front of it yourself.
Assess radiant heater brackets and controls with the HP version
Bracket 14214 is the ceiling bracket within the stated HP accessory range. The combination is checked against the specific HP model and prescribed mounting orientation. The table shows the accessory; the radiant heater’s requirements remain in the model manual. Even a compatible bracket does not make an insufficiently load-bearing beam or inadequate clearance suitable.
Read more
The Vida dimmer is a different kind of radiant heater accessory. It controls the heat setting of a suitable electric radiant heater and does not replace a room thermostat when temperature control is required for space heating. Therefore also describe how the heater is used. A sheltered veranda with local warmth and an enclosed room with a fixed temperature create different control requirements.
Confirm compatibility before ordering
Rating plates matter for an existing installation. An overview photo shows how a product hangs in the room, but not always which version was supplied. Therefore send the panel code and a photo of the connection. For installation accessories, include the current fixings; for control components, also the thermostat and receiver. We can then check the combination without deriving a model number from appearance alone.
Read more
An older connection may differ from the current precon configuration. The product generation of a lighting frame or receiver may also matter. Specify which components remain and which need replacing. Do not modify a cable or holder to fit before the combination is assessed. The proposed item and suitable installation method belong to the same product choice.
Documentation and a complete component enquiry
For installation, consult the documents for every involved component. The official EB brochure and Welltherm lighting frame manual cover different applications. A clearance or installation movement from one document is not applied to another product group without checking.
Read more
Welltherm manufactures the heating products and HeatXL handles Benelux distribution. You can explore product possibilities at HeatXL and compare available retail prices at infraroodpaneel.nl (Opens in a new tab). A complete enquiry identifies the panel, accessory, desired application and existing connection. This allows the price and preparation of the whole combination to be discussed, including conditions that may differ by component.
Products for your heating plan
Welltherm Recessed Ceiling Frames
Integrate a compatible panel into the ceiling. Choose the frame based on panel type, dimensions and ceiling structure.
View product information →Welltherm LED Frames
Combine a compatible infrared panel with lighting. Select the frame, power supply and controls together.
View product information →
Welltherm Towel Rails
Choose the compatible rail for a BP bathroom panel. The open and continuous versions differ in width and shape.
View product information →
Welltherm Floor and Universal Stands
Position a suitable glass or metal panel freestanding. Compare the classic stand, wheeled version and universal stand. To prepare, you can assess positioning and required components together.
View product information →
Welltherm HP ceiling bracket
A ceiling bracket for the intended HP radiant heaters. We check the combination with your model.
View product information →Explore these options too
Accessories & finishes
LED frames for infrared panels
Combine a Welltherm panel with warm white lighting. The LED frame adds light around a compatible glass or metal version on the wall or ceiling.
View finish ↗Accessories & finishes
Recessed ceiling frame for infrared panels
Integrate a compatible Welltherm version into the ceiling with a dedicated recessed frame. The EB range offers four sizes for different panel dimensions.
View finish ↗Accessories & finishes
Towel rails for bathroom panels
Complete a suitable Welltherm BKW version with a towel rail. Choose an open or continuous design and a finish that suits your bathroom.
View finish ↗From product choice to a tailored proposal
Tell us which space you want to heat. You receive advice on the suitable version, output and installation, with a quotation for your situation.
