Welltherm application example. Also view the technical product images.
WELLTHERM · GLASS PANELS
Welltherm infrared heated mirror
Explore the available Welltherm range, prices and ordering options. Opens in a new tab.
Select your model and discuss a tailored proposal with HeatXL
A mirror that also provides warmth: our infrared heated mirror combines a functional mirror surface with radiant heat. Choose the size that suits your bathroom or dressing room. We help with output, positioning and suitable controls.
We match the panel, connection and controls together. View the connection and controls or discuss your existing installation when making an enquiry.
- Mirror and radiant warmth combined
- SP range in several sizes
- Matched to primary or supplementary heating
A tailored proposal for your space, finish and installation.
A mirror that suits the space
A heated mirror can be a logical choice when you want to install a mirror anyway. The SP range has a glossy reflective safety-glass front. Choose from different sizes and outputs. This lets you assess the relationship between mirror size, available wall and required warmth together, for a bathroom or dressing room, for example.
Behind the reflection is a complete heating panel construction: 5-millimetre ESG-H safety glass, ESHC Plus technology, rear insulation and two integrated thermal safety switches. Glass edges have a C-profile polish and corners are rounded to a 5-millimetre radius. Suitable ceiling mounting requires prescribed glass fixing clips; for rectangular SP panels, this is set 14171. In a bathroom, the manual together with the installation zone determines the appropriate location: zones 1 and 2 are excluded for this standard glass range.
From mirror size to a suitable proposal
A heated mirror does not automatically have sufficient output for the whole space. Therefore consider insulation, other heating and usage. This range has an IPX4 protection rating; permitted bathroom positioning follows the complete installation and model instructions. A compatible LED frame is a separate accessory choice with its own protection classification.
Current range
Welltherm Mirror
A mirror that also provides radiant warmth. Choose a size and output for your bathroom or dressing room.
| Article | Version | Power output | Dimensions | Weight | Quotation |
|---|---|---|---|---|---|
| SP0370 | Mirror | 370 W | 60,0 × 60,0 × 2,2 cm | 9,6 kg | Choose SP0370 |
| SP0580 | Mirror | 580 W | 60,0 × 90,0 × 2,2 cm | 13,5 kg | Choose SP0580 |
| SP0780 | Mirror | 780 W | 60,0 × 120,0 × 2,2 cm | 17,3 kg | Choose SP0780 |
| SP0930 | Mirror | 930 W | 60,0 × 150,0 × 2,2 cm | 22,0 kg | Choose SP0930 |
| SP1250 | Mirror | 1250 W | 75,0 × 150,0 × 2,2 cm | 27,5 kg | Choose SP1250 |
- Front
- 5 mm ESG-H safety glass
- Technology
- ESHC Plus
- Protection rating
- IPX4
- Connection
- 650 mm connection cable with precon GST15i3; select suitable temperature controls separately.
Connection and application: 650 mm connection cable with precon GST15i3; select suitable temperature controls separately.
Choose a Welltherm infrared heated mirror based on two functions
Welltherm infrared heated mirrors combine everyday mirror use with an electric heating panel. Those two functions are assessed together. A mirror fitting pleasantly above the basin does not inherently have suitable output for the whole room. Therefore specify the warmth you seek and how you want to use the mirror. Available wall space, normal viewing distance and heat demand help discuss a suitable SP version.
The current range has five sizes, from the 370-watt SP0370 to the 1250-watt SP1250. The table on this page gives precise dimensions and weights. A longer front offers different mirror proportions and output; the largest front is therefore not automatically best. Start with the space and available mounting position. We then compare the mirror size convenient for your use within technically suitable options.
Welltherm manufactures the panels and HeatXL handles Benelux distribution. We help relate the version to the space plan. A proposal identifies the item, installation, connection and control components. This lets you assess the mirror as a complete product combination. For the wider choice between a mirror, ordinary panel or towel version, explore bathroom heating based on your daily routine.
Read more
An ordinary mirror with separate anti-condensation provision has a different product function. The SP range is selected as a heating panel with output, connection and temperature controls. Its reflective front is the appliance’s visible version. If you only want to demist an existing mirror, describe that requirement separately. This avoids comparing two different solutions under the same name. The desired result determines the useful product direction.
Mirror dimensions and daily use in the actual space
Measure the available wall and consider user positions. At a basin, you want a useful mirror view from the normal standing position. A broad unit and several users may create different preferences from a compact cloakroom basin. Chosen front dimensions are then compared with heating function and installation requirements. A photo with unit and wall dimensions helps discuss these questions together instead of selecting only a mirror surface.
Include sight lines and lighting. A window opposite the mirror can determine reflection, while lamps on each side give a different experience from overhead light. A warm mirror panel is not a complete lighting design. For a compatible LED frame, size, power supply and operation are selected separately. That component also receives its own application assessment. View LED frames to discuss this option as a specific combination.
Read more
Consider space around the front. A tap, wall light, cupboard door or storage niche can affect positioning. Include fixed elements in the drawing and mention whether they can still change. The panel manual determines required clearances; the furniture layout also determines practical mirror use. A mounting position must suit both tasks. This is particularly useful during renovation while the basin unit and electrical connection points are still being prepared.
A longer mirror can change the vertical usable area. Consider how top and bottom relate to users and layout. Use actual overall dimensions from the table for this assessment. A nominal designation or example photo is not a dimensional plan for your wall. State whether you mainly want a face mirror, larger mirror area or specific interior proportion. Final product selection is then combined with the heating application.
Relate heat demand to existing heating
Describe whether the SP version should provide primary or supplementary heating. If underfloor heating remains, the mirror may have a supplementary task. If panels must supply all room heat, we assess heat loss and positioning of the entire installation. An aesthetically fitting mirror size may have different capacity from that required. Therefore clearly identify existing heat sources and the new panel’s intended role.
Read more
Room dimensions, insulation and glazing area provide context for heat demand. A small well-insulated dressing room differs from a bathroom with external walls and extensive glazing. Ventilation and the desired operating temperature also matter. A universal output per square metre does not fully describe those conditions. Add known details to the enquiry. If building information is missing, mention it so the proposal’s assumptions remain identifiable.
After switching on, the mirror first heats its own panel. The room then responds through radiant warmth and secondary air heating. Therefore allow for warm-up time. A brief morning routine needs a suitable schedule if the room is cold beforehand. Preparation may differ where background heating is already present. The programme is chosen based on normal usage times and checked against actual conditions after commissioning.
Position the front so the layout does not unnecessarily obstruct intended heat output. A tall cupboard directly in front or textiles over the front change usage conditions. The panel is not a towel dryer. To hang towels on the heating solution, explore a specific BP bathroom panel with compatible rails. The mirror range and BP towel function are assessed as separate product choices even when both fit the same bathroom.
Assess bathroom zones for the specific SP model
The SP range has an IPX4 protection rating. This is used together with model instructions and electrical positioning. Installation instructions exclude zones 1 and 2 for this standard glass range. Therefore do not choose a position solely because the front appears in a bathroom photo or another appliance has the same IP designation. Indicate bath, shower, basin and connection point on the floor plan and have the professional assess the specific installation.
An LED frame has its own protection rating and supply. Placing it around an IPX4 mirror does not make it suitable for every bathroom position. Assess the complete combination, including lighting components, wiring and operation. A mirror model initially suitable may still require different positioning for the desired lighting setup. Communicate lighting preferences early so components are prepared as one specific installation rather than improvised after mounting.
Read more
Preferably choose a suitable position before finalising tiling and connection points. Send an accurately dimensioned sketch with sanitary fixtures and intended panel wall. Also mention fixed shower screens and planned changes. Product direction and electrical preparation can then be discussed together. An existing mirror position is not automatically suitable for a heating panel. The appliance adds electrical and thermal conditions to that position.
In a dressing room or other dry room, fixings, clearances and electrical connection remain relevant. Use the same careful preparation even without a shower. A mirror panel is an appliance with weight and a warm front. Have the supporting substrate and installation components matched to the selected item. For an existing SP version, check its own product and document versions; new-generation details are not applied to an older installation without checking.
Fixings, glass and an accessible connection
The front comprises 5-millimetre ESG-H safety glass with polished edges and rounded corners. Heating technology and insulation are behind the front. This construction creates a panel product with its own installation instructions. It is not hung like an arbitrary decorative mirror. Check the selected model’s weight and have the wall structure and fixings assessed. Particularly for a lining wall, establish beforehand how the load is supported and which preparation is needed.
Permitted ceiling mounting requires prescribed glass fixing clips. Rectangular SP models use set 14171 according to the panel manual. A ceiling position is assessed for the specific application; an ordinary wall mirror preference is a different design task. Include available height, fixings and maintenance access. Use the chosen glass product’s installation details and do not interchange them with metal panel or high-temperature system instructions.
The current SP connection uses a 650-millimetre cable with precon GST15i3. The receiver and connection variant are selected for that version. Discuss how the cable remains accessible and where control components can go. A finished mirror wall can look understated when this preparation happens in time. The connection need not become inaccessible. View precon and controls to discuss the desired combination with the installer.
Read more
Ensure connection and mounting work is performed by a professional using the specific model. During renovation, state which finishing layers will still be added. Final dimensions and supporting structure are checked against the finished situation. Keep the article number and preparation photos in the project file. For later maintenance or extension, this helps identify existing fixings and connections specifically rather than relying on a similar example photo.
Temperature controls and actual consumption
The mirror finish is not a built-in thermostat. Select suitable controls with the required receiver and connection components. DE and SA have their own components and communication methods. A desired app function is developed as a separate system choice. The reflective front does not mean Wi-Fi is built into the panel. View the control options and describe desired daily operation so the combination suits your room and preferences.
Consumption follows power and operating time. A hypothetical SP0580 example shows the calculation: 0.58 kW multiplied by two hours fully switched on equals 1.16 kWh. Cost is that quantity multiplied by your own electricity tariff. A thermostat may switch during use; the result depends on heat loss and desired temperature. The example is therefore not a fixed cost per bathroom visit. Also read the consumption guide for the underlying calculation steps.
Read more
The temperature sensor is used in a suitable measurement position. Directly beside another heat source, in sunlight or strong draughts, measurement can differ from the normal usage area. Therefore determine its position with the room layout. A fixed morning and evening routine can be prepared through a suitable programme. After commissioning, check settings against actual warm-up time. Change one starting point at a time purposefully so you can assess its effect.
Consider a measurement together with normal room conditions. A colder season, longer usage or different ventilation setting can change consumption. Note those conditions when comparing programmes. The mirror finish is not a separate energy-saving function. Appropriate product choice, installation and controls support the heating task; the building’s heat demand remains. A representative measurement period therefore gives more insight than a conclusion based on one brief use.
Quotation and maintenance for an identifiable version
For an enquiry, send the desired mirror size, room details and photos of the intended wall. Describe existing heating and usage times. For a bathroom, add the sanitary layout and connection options. Mention any lighting preference so it is assessed as a separate compatible component. With a quotation for heated mirrors, you can then assess item, output, mounting and controls as a complete combination for your situation.
Check that the proposal’s version and components describe the same task. A separate mirror panel is a different offer from a combination with receiver, connection and lighting frame. Ask what preparation the installer performs and which components are selected separately. Price is determined on request for the specific version. For the current collection, also view Welltherm products at infraroodpaneel.nl (Opens in a new tab).
Clean the front according to the mirror version’s instructions and let the panel cool first. Do not use arbitrary abrasive methods on the mirror surface. Keep the front free of textiles and treat fixings and connection as appliance components. Retain proof of purchase, article number and installation details. Warranty terms are used for the chosen version and purchase; separate accessories may have their own conditions.
For the technical basis, use the Welltherm manual for glass panels alongside current SP product details. For an existing panel, check its associated version and connection. A complete file supports focused discussion of use, support or a new room. Relocating the panel requires a new assessment of mounting position, clearances, heat demand and controls.
Documentation for your version
Match the product information and installation instructions to your chosen article number. On the downloads page, we give Dutch documents priority where available.
Questions about infrared heated mirrors
Is a mirror panel the same as an anti-condensation film?
The SP range is an electric infrared heating panel with a reflective front. Separate film for demisting a mirror has a different function. Have heating output assessed for your bathroom.
What do you need for a quotation?
Send the desired item or version, together with the room dimensions and your usage. For a panel, we also assess insulation and the mounting position; for an accessory, we check the combination with the existing product.
How much does this Welltherm solution cost?
The price depends on the version, quantity, accessories and any project arrangements. Request a quotation with your product choice and situation to receive a tailored proposal.
Explore these options too
Glass panels
Kristall glass infrared panel
A bright, glossy white glass front for an understated appearance. Welltherm Kristall combines infrared warmth with a flat ESG-H safety glass surface.
View finish ↗
Glass panels
Satino matt glass infrared panel
A white glass panel with a soft, satin appearance. Welltherm Satino suits interiors where a glossy surface is less desirable.
View finish ↗
Glass panels
Infrared chalkboard heating
A writable black panel that also provides warmth. The Welltherm Tafel range adds a practical chalkboard to a kitchen, workplace or another suitable space.
View finish ↗From product choice to a tailored proposal
Tell us which space you want to heat. You receive advice on the suitable version, output and installation, with a quotation for your situation. To prepare, you can prepare heated mirrors for your space.
