HPKW white infrared dark radiant heater

Targeted warmth with a Klassik version

The HPKW range forms part of the Welltherm HP dark radiant heaters. Ceramic elements provide heat without the conspicuous visible glow of some other heater types. This white Klassik version has its own dimensions and weight compared with the glass variant. You can use this range on a suitable veranda, sheltered half-open terrace or suitable indoor project. We advise you on output and positioning.

Output and controls for your location

HPKW versions of 650, 1,300 and 1,950 watts are listed. These heaters have an IPX4 protection rating and are suitable for wall and ceiling mounting from 1.80 metres, with prescribed installation clearances. Actual perceived warmth also depends on wind, positioning and distance. Vida can make a suitable combination adjustable; temperature controls must also be suitable for an intended indoor application.

HPKW white infrared dark radiant heater for light surroundings

HPKW is the white Klassik range of Welltherm ceramic dark radiant heaters. This version may suit a light wall, white ceiling or veranda with a light supporting structure. The appliance remains a targeted heating product with its own installation conditions. White colour does not change specified output or automatically save energy. First check whether the range technically suits the desired position. You can then assess the finish as part of the visible design, together with lighting, beams and any other wall or ceiling equipment.

A useful first step is viewing the location from normal usage height. Where do you see the appliance when seated at the table, and does the chosen positioning remain understated in the whole? A light heater on a dark beam may create a clear accent, while the same version against a light surface gives less contrast. Photos from the seating position are more informative than just a close-up of the mounting wall. Include them with your enquiry. We can then relate desired appearance to a technically useful position and suitable output.

Choose Klassik as a distinct product version

White Klassik models have the same specified dimensions and weight as the corresponding black HPKS models. Colour distinguishes these two ranges. HP Glas white, with article codes HPGW, instead has a different front and its own dimensions and weights. This matters when comparing for an existing mounting location. An appliance resembling another HP version is not the same installation without checks. The full article number keeps the chosen product, details and fixings together when assessing white variants.

View HP Glas white if you are primarily undecided about the front. We select heating capacity from the place of use; compatible items can then be compared visually. Available space also matters. Longer versions occupy more wall length than the compact model. Required clearances must remain available as well. This lets you translate a preference for white Klassik into an achievable design instead of only a colour choice on a product photo.

The short HPKW0650 and longer versions

HPKW0650 has one 650-watt ceramic element and measures 26.0 by 9.5 by 17.1 centimetres. With a specified weight of 1.7 kilograms, it is the most compact appliance in the white Klassik range. HPKW1300 contains two elements, totalling 1,300 watts. This model is 50.9 centimetres long and weighs 3.0 kilograms. HPKW1950 has three elements, 1,950 watts, a length of 75.9 centimetres and a weight of 4.0 kilograms. The other specified dimensions of these longer models are also 9.5 by 17.1 centimetres.

The suitable version follows from the position and usage. An elongated table, compact corner and occupied zone where people often stand may need different arrangements. Specify user positions relative to the possible mounting point. We can then assess whether direction and distance match the proposed output. The largest number in the table is not automatically the best choice. For several appliances, we show total capacity and distribution so the heating plan remains understandable for your room or veranda.

A light veranda for several usage times

A veranda may be used for breakfast, daytime work and an evening at the table. Your seated position may change by occasion. Therefore describe the main times you want to use the heater. A fixed reading chair can provide a clear target zone, while a large table has a broader seating arrangement. Draw these positions in a simple sketch with available wall and ceiling points. We can then assess the white HPKW version based on usage, considering layout and installation conditions.

Also consider changes in shelter. A sliding wall open during the day and closed in the evening changes the environment. A fabric or sunshade in another position may affect clearance near the appliance. Include such components in the plan. Perceived warmth is partly determined by wind, distance and direction. We therefore do not use a fixed number of square metres as a guarantee for every position. A well-described veranda helps discuss options realistically and match controls to actual use.

Wall mounting or a suitable ceiling position

According to product details, the HPKW range is suitable for wall and ceiling mounting with compatible fixings. Minimum height is 1.80 metres; the HP manual generally recommends 2.3 to 2.5 metres. Discuss available height with radiant direction. A high mounting point must be accessible for installation and capable of useful aiming. For ceiling mounting, the catalogue specifies bracket 14214 for the HP range. Have confirmation of the components and fixings needed for the selected appliance and existing structure.

Use HPKW installation details to assess clearances. HP instructions specify at least 30 centimetres to the ceiling and 5 centimetres to adjacent walls. Keep curtains, textiles and other combustible materials at least one metre away. The mounting wall must not be directly irradiated. Therefore aim using the prescribed bracket within the permitted angle. These conditions form part of model selection. They must not be replaced by a general assumption that a light finish or sheltered position automatically makes every mounting location suitable.

Include electrical provision in renovation

HPKW has a 185-centimetre cable with open ends. When renovating a veranda or indoor space, determine supply and routes before finishing. Have the connection made professionally and discuss cable and control component positions. The appliance is not described as a product supplied as standard with a fitted socket plug. It also does not have the precon connection of other Welltherm product groups. Therefore select connection components for the chosen HPKW model, not based on previous experience with a wall panel.

For several white heaters, total electrical capacity must also be clear. Provide quantities and wattages to the installer. Wiring, any circuit allocation and compatible components are assessed for the complete installation. Mention existing outdoor lighting or other equipment during preparation. We can include suitable controls for the desired heater arrangement in the proposal. An overview of supply, heater and controls clarifies responsibilities and helps organise the visible result neatly against the light structure.

Controls for your way of using the space

Desired controls start with a simple question: do you want to adjust the heat setting at an occupied position or keep an indoor room at temperature? For a suitable combination, Vida can make the heat setting adjustable. The associated operation depends on the selected version and system combination. An app or remote control must therefore not be assumed as standard for every HPKW arrangement without checks. Discuss options through our information on Vida controls for infrared heaters or specify the desired method in your enquiry.

For space heating, suitable temperature controls form part of system selection. A dimmer changing output does not automatically replace a room thermostat. For several indoor usage zones, we also assess whether separate operation is needed. The existing installation may matter, but compatibility must be confirmed. Therefore provide current component article codes. We can then propose a clear solution matching the white Klassik heater, supply and desired temperature or power controls without attributing functions to the appliance that belong only to additional components.

Targeted warmth without taking over lighting

The ceramic dark radiant heater provides warmth without the conspicuous visible glow of some other heater types. Room lighting therefore remains its own design choice. Do not count HPKW as a light source, and a nearby lamp should not determine a thermally unfavourable heater position. Consider both components together in the layout. This matters, for example, on a low veranda beam with existing lighting. A clear plan can include clearances, cable routes and seating positions for both functions before fixing mounting points.

The appliance has a warm-up phase and user positioning affects perceived warmth. Therefore describe when you want to experience warmth and how long you usually stay there. A brief stop creates different expectations from an entire evening. A cold indoor space must also come up to temperature; the heater cannot be assessed solely by colour and wattage. We relate capacity to the installation’s purpose. This keeps selection practical and avoids promising a fixed warm-up time for very different situations.

Environment, care and later changes

HPKW has IPX4, but this does not give general permission for every outdoor installation. The complete environment, connection and wiring must be assessed appropriately. The HP manual excludes the appliance, connection point and wiring from bathroom zones 0, 1 and 2. Specific bathroom products are a separate choice for bathroom heating. Installation conditions remain applicable even on a sheltered terrace. Photograph the structure and open sides so the available position is clear. The installing party checks how the proposed arrangement is installed correctly.

Keep clear space available during use, including when furniture or shading moves. Follow product instructions for maintenance and let the switched-off appliance cool before work. Keep model and control details with the installation. If you rearrange the veranda or add a wall later, you can use these for focused advice again. A change in occupied position may also require a different radiant direction or controls. Assess changes as part of the whole instead of moving the appliance to another wall without further checks.

The proposal for your white Klassik heater

For a quotation, send a sketch of the occupied zone, photos of possible mounting points and available height. State open sides, any wind, seating quantity and usage times. Provide your preference for HPKW0650, HPKW1300 or HPKW1950 if you have already chosen a model. Also note desired controls and existing power supply. We can then prepare capacity and positioning together. White Klassik remains your product preference, while the complete system is matched to the space and usage.

The price follows from the selected heater, quantity, required fixings and suitable control components. Use a quotation request to also state which components already exist and who installs them. HeatXL then makes a specific proposal for your arrangement. To compare contrast with a black appliance, view HP Klassik black. Comparing the same capacity with your desired finish supports an informed choice for both appearance and heating use at your position.

Renovation with a new light ceiling

When a veranda receives a new light ceiling, first determine where the supporting structure and power remain available. A white HPKW heater can match the finish but is not fixed solely into the visible ceiling cladding because the colours match. Provide the selected model and weight to the installing party and discuss required fixings. Also send planned lamp and curtain-track positions. Technical conditions can then be checked alongside the finish.

If the mounting point moves during renovation, have direction, height and clearances reassessed. Choosing white remains an appearance preference within a correctly prepared arrangement.

Choose a suitable mounting position for HPKW

For HPKW, the HP manual generally recommends a mounting height of 2.3 to 2.5 metres; 1.80 metres is the minimum. Maintain at least 30 centimetres to the ceiling and 5 centimetres to adjacent walls. Aim the heater towards the occupied zone with the prescribed bracket and permitted angle. The mounting wall must not be directly irradiated. Keep curtains, textiles and other combustible materials at least one metre from the appliance.

A sheltered, half-open veranda needs a different assessment from a completely open location with wind and rain. IPX4 does not give general permission for every outdoor position. The HP manual excludes the appliance, connection point and wiring from bathroom zones 0, 1 and 2. Have open cable ends connected professionally. Suitable temperature controls are required for space heating; a Vida dimmer controls the heat setting and does not replace those room controls.